Support Software
|
Version
|
Outline
|
CX-Programmer
|
Ver.9.0
|
To create and debug programs for SYSMAC CS/CJ/CP/NSJ Series, C-series, and CVM1/C-series CPU Units.
Data can be created and monitored for high-speed-type Position Control Units.
|
CX-Integrator
|
Ver.2.4
|
To build and set up FA networks, such as Controller Link, DeviceNet, CompoNet, CompoWay, and Ethernet networks.
The Routing Table Component and Data Link Component can be started from here. DeviceNet Configuration functionality is also included.
|
Switch Box Utility
|
Ver.1.6
|
Utility software that helps you to debug PLCs. It helps you to monitor the I/O status and to monitor/change present values within the PLC you specify.
|
CX-Protocol
|
Ver.1.9
|
To create protocols (communications sequences) between SYSMAC CS/CJ/CP/NSJ-series or C200HX/HG/HE Serial Communications Boards/Units and general-purpose external devices.
|
CX-Simulator
|
Ver.1.9
|
To simulate SYSMAC CS/CJ/CP/NSJ-series CPU Unit operation on the computer to debug PLC programs without a CPU Unit.
|
CX-Position
|
Ver.2.5
|
To create and monitor data for SYSMAC CS/CJ-series Position Control Units (except for High-speed type).
|
CX-Motion-NCF
|
Ver.1.9
|
To create and monitor data for SYSMAC CS/CJ-series Position Control Units with MECHATOLINK-II (MC_71)
|
CX-Motion-MCH
|
Ver.2.2
|
To create data and motion programs and to monitor data for SYSMAC CS/CJ-series Motion Control Units with MECHATOLINK-II (MCH71).
|
CX-Motion
|
Ver.2.3
|
To create data for SYSMAC CS/CJ-series, C200HX/HG/HE, and CVM1/CV-series Motion Control Units, and to create and monitor motion control programs.
|
CX-Drive
|
Ver.1.9
|
To set and control data for Inverters and Servos.
|
CX-Process Tool
|
Ver.5.2
|
To create and debug function block programs for SYSMAC CS/CJ-series Loop Controllers (Loop Control Units/Boards, Process Control CPU Units, and Loop Control CPU Units).
|
Faceplate Auto-Builder for NS
|
Ver.3.1
|
Automatically outputs screen data as project files for Ns-series PTs from tag information in function block programs created with the CX-Process Tool.
|
CX-Designer
|
Ver.3.1
|
To create screen data for NS-series PTs.
|
NV-Designer
|
Ver.1.1
|
To create screen data for NV-series small PTs.
|
CX-Configurator FDT
|
Ver.1.1
|
For setting various units by installing its DTM module.
|
CX-Thermo
|
Ver.4.2
|
To set and control parameters in components such as Temperature Control Units.
|
CX-FLnet
|
Ver.1.0
|
For system setting and monitoring of SYSMAC CS/CJ-series Fl-net Units.
|
Network Configurator
|
Ver.3.1
|
To set up and monitor tag data links for CJ2 (Built-in EtherNet/IP) CPU Units and EtherNet/IP Units.
|
CX-Server
|
Ver.4.3
|
Middleware necessary for CX-One applications to communicate with OMRON components, such as PLCs, Display Devices, and Temperature Control Units.
|
PLC Tools (Installed automatically.)
|
|
A group of components used with CX-One applications, such as the CX-Programmer and CX-Integrator. Includes the following:
I/O tables, PLC memory, PLC Setup, Data Tracing/Time Chart Monitoring, PLC Error Logs, File Memory, PLC clock, Routing Tables, and Data Link Tables.
|
