CX-ONE 4.3 Versi Terbaru 2013 ~ Tutorial Mikrokontroler

Support Software	Version	Outline
CX-Programmer	Ver.9.0	To create and debug programs for SYSMAC CS/CJ/CP/NSJ Series, C-series, and CVM1/C-series CPU Units. Data can be created and monitored for high-speed-type Position Control Units.
CX-Integrator	Ver.2.4	To build and set up FA networks, such as Controller Link, DeviceNet, CompoNet, CompoWay, and Ethernet networks. The Routing Table Component and Data Link Component can be started from here. DeviceNet Configuration functionality is also included.
Switch Box Utility	Ver.1.6	Utility software that helps you to debug PLCs. It helps you to monitor the I/O status and to monitor/change present values within the PLC you specify.
CX-Protocol	Ver.1.9	To create protocols (communications sequences) between SYSMAC CS/CJ/CP/NSJ-series or C200HX/HG/HE Serial Communications Boards/Units and general-purpose external devices.
CX-Simulator	Ver.1.9	To simulate SYSMAC CS/CJ/CP/NSJ-series CPU Unit operation on the computer to debug PLC programs without a CPU Unit.
CX-Position	Ver.2.5	To create and monitor data for SYSMAC CS/CJ-series Position Control Units (except for High-speed type).
CX-Motion-NCF	Ver.1.9	To create and monitor data for SYSMAC CS/CJ-series Position Control Units with MECHATOLINK-II (MC_71)
CX-Motion-MCH	Ver.2.2	To create data and motion programs and to monitor data for SYSMAC CS/CJ-series Motion Control Units with MECHATOLINK-II (MCH71).
CX-Motion	Ver.2.3	To create data for SYSMAC CS/CJ-series, C200HX/HG/HE, and CVM1/CV-series Motion Control Units, and to create and monitor motion control programs.
CX-Drive	Ver.1.9	To set and control data for Inverters and Servos.
CX-Process Tool	Ver.5.2	To create and debug function block programs for SYSMAC CS/CJ-series Loop Controllers (Loop Control Units/Boards, Process Control CPU Units, and Loop Control CPU Units).
Faceplate Auto-Builder for NS	Ver.3.1	Automatically outputs screen data as project files for Ns-series PTs from tag information in function block programs created with the CX-Process Tool.
CX-Designer	Ver.3.1	To create screen data for NS-series PTs.
NV-Designer	Ver.1.1	To create screen data for NV-series small PTs.
CX-Configurator FDT	Ver.1.1	For setting various units by installing its DTM module.
CX-Thermo	Ver.4.2	To set and control parameters in components such as Temperature Control Units.
CX-FLnet	Ver.1.0	For system setting and monitoring of SYSMAC CS/CJ-series Fl-net Units.
Network Configurator	Ver.3.1	To set up and monitor tag data links for CJ2 (Built-in EtherNet/IP) CPU Units and EtherNet/IP Units.
CX-Server	Ver.4.3	Middleware necessary for CX-One applications to communicate with OMRON components, such as PLCs, Display Devices, and Temperature Control Units.
PLC Tools (Installed automatically.)		A group of components used with CX-One applications, such as the CX-Programmer and CX-Integrator. Includes the following: I/O tables, PLC memory, PLC Setup, Data Tracing/Time Chart Monitoring, PLC Error Logs, File Memory, PLC clock, Routing Tables, and Data Link Tables.

Support for the SYSMAC CJ2M

Windows7 is now supported! Tested By Me

The following units are also be supported.

CP1E-E10/E14/N14/N60 (10/14/14/60 points)
CJ1W-NC281/NC481/NC881 Position Control Units with EtherCAT Interface
CP1E-NA20 CPU Units (20 points)
Compact NV-series NV4W Programmable Terminals
CJ1W-AD042/DA042V Analog I/O Units (high-speed models with direct conversion)
CJ1W-SCU22/SCU32/SCU42 Serial Communications Units (high-speed models)

Untuk Download bisa langsung di website resmi omron europe
Gunakan ini untuk login
username : tutorialmikrokontroler.net@gmail.com
password : mikrokontroler

software dapat anda langsung download di tab software seperti ini, pilih cx-one DVD jika ingin download DVD nya.
Untuk S/N licence ada pada tab software registration, validated licence.